Chassis:
Land Rover 130 TDI (4x4)
GVM 2400 kg
Engine
- 2.5 Litre diesel turbocharged
- 83kW @ 4200RPM
- 300 Nm @ 1900 rpm
Transmission Manual
Steering
Brakes
- Front discs
- Rear discs
- Hydraulic
Tyres
Steel rims.
Coil springs suspension with heavy duty axle.
Rigid box section steel chassis.
Complies –Road Traffic Act of 1989.
Cab:
Steel cab.
Seating for three including the driver.
Two front head restraints.
Interior courtesy light.
Heater/defroster.
Seat belts for all positions.
Two speed wipers with intermittent wipe.
Body:
All aluminium large dimension extrusions with
4mm wall thickness.
Under-body cross members shall be constructed
entirely from a 76mm x 76mm aluminium ''I''
beam and heavy walled extrusions and shall be
full width of the body.
The body shall have a body side protection rub
rail along the length of the body on each side and
at the rear.
Six (6) large enclosed and vented equipment
compartments with lockable roller shutter doors.
Auxiliary access ladder for access to hose bed.
The rear body shall have a cut away to enhance
angle of departure.
Hose bed:
The hose bed compartment shall be free of
sharp edges and projections to prevent damage
to hose. The hose bed shall be completely
removable for easy access to the water / foam
tanks. The deck design shall incorporate a
a provision for the installation of adjustable hose
bed dividers.
The hose bed shall be fitted with one (1) hose bed
divider.
Water Tank:
600 litre capacity constructed from 12mm thick
polypropylene material.
Foam Tank:
50 litre capacity cell as part of the water tank
with separate fill /vent / overflow tower.
Pump System:
Option of portable pump
to allow pump & roll
Hale 2CBP two stage pump.
Midship mount.
Maximum flow LP 380 l/min.
Maximum outlet pressure 69 bar.
Stainless steel plumbing.
Electric vane type primer.
Two (2) 65mm instantaneous discharges.
Two (2) 38mm crosslay discharges.
Auxiliary engine cooler.
|
Pump Panel:
Operator’s controls and gauges shall be mounted
on a stainless steel pump panel positioned on the left side of the vehicle.
Foam System:
Williams WATP#500 ATP system for Class A
application. Adjustable from 0.25 – 1%.
Crosslays:
Two (2) 38mm crosslays shall be positioned
above the pump. Each crosslay shall be capable
of accommodating 30m x 38mm double jacket
hose.
Warning Lights:
One (1) Federal Signal Aerodynic model
ADL5202 roof light bar with red and clear lenses.
One (1) Federal model MS-100-01 Dynamax 100
watt speaker.
One (1) Federal Signal model PA300-200MSC
solid state electronic siren with attached noise- cancelling PA microphone.
One (1) Alternating headlight flashing system.
Two (2) red Federal Signal rear rotating light.
One (1) Federal strobe package in accordance
with NFPA Standards.
Unity deck lights.
Standard Equipment, Supplied and Fitted:
1 x Three-way collecting head
2 x 3m x 76mm hard suction hose
2 x Hard suction hose mount racks
1 x Chrome barrel strainer
1 x Galvanized basket strainer
1 x Spare wheel (loose)
1 x 20T hydraulic jack & wheel spanner
1 x Locking fuel cap with 3 keys
2 x Operator, service, and parts manuals
Options Available:
* Pneumatic lightmast system
* 5 kVa generator
* Electric winch
* Roll over bar
* Hose deck light
* Foam injection system IPO ATP
* Heavy duty brush guard
* Ground sweep nozzles
* Hose reel/s IPO crosslays
* Pan type doors IPO roller shutters
* PAC equipment mounting
* Adjustable compartment shelves
* Pull out trays
* Full compliment of fire fighting & rescue
equipment
* Central locking system for roller shutter doors
* Strip illumination for compartments
* Signwriting and lettering
* S stripe in 100mm reflective or painted |
